Traditional Tools & Skills
Information provided in this toolbox is intended to support the use of Traditional Tools and Skills for administrative activities in wilderness. A process for determining the minimum requirement and minimum tool is described and information and training resources are provided. The toolbox features sections on common traditional tools (i.e. saws, axes, rigging, grip hoists, rock tools, etc.), travel methods (i.e. livestock, watercraft, sled dogs, etc.), and project examples (i.e. trails, weeds, etc.).
Introduction
Overview
The use of traditional tools and skills (TTS) for necessary administrative activities in wilderness is a basic principle of wilderness stewardship. The basis for this principle is found in the Wilderness Act itself and implemented through agency regulations and policy. The use of TTS or non-motorized tools and methods is directly related to both the purpose and the definition of wilderness as described in the Wilderness Act and agency policy.
Information provided in this toolbox is intended to support the use of TTS for administrative activities in wilderness. The use of TTS is mandated by both the Wilderness Act and agency policy and exceptions are made only when the use of motorized equipment or other prohibited uses are screened through narrow criteria. Comfort, convenience, economic efficiency, and commercial value are not standards of management in wilderness or criteria that are used to screen proposals to use something other than TTS. Assumptions about the use of TTS are often not true and can be overcome. Additional information and a process for making decisions related to use of TTS skills is contained in the Minimum Requirements Decision Guide.
Management Benefits
The use of TTS to accomplish work in wilderness not only helps ensure that the ’minimum tool’ is used but also provides benefits for wilderness managers and crews. Because the use of TTS may require more human powered effort, it prompts a better consideration of whether the activity really needs to occur in wilderness and then, if it does, what the minimum required activity should be. And, once a project and tool are determined, the use of TTS creates an environment that demands greater problem solving skills and often better planning and collaboration before the project begins. The use of TTS also preserves these skills among wilderness managers, crews, contractors, and volunteers.
Public Benefits
The use of TTS provides a public benefit from wilderness. When the public observes the use of TTS in wilderness or at demonstrations outside wilderness the reaction is often one of awe and pride. If TTS were not used in wilderness perhaps these skills would be lost and future generations would not be able to observe how work is done without motors and marvel in the skill and dedication of those who work in wilderness.
Law and Policy
Determining the Minimum Requirement and Minimum Tool
Training and Information Contacts
- FS Regional Trainers and Information Contacts
- Ninemile Wildlands Training Center
- Missoula Technology Development Center Publications
- Student Conservation Association Traditional Skills Training
- Lightly on the Land-SCA Trails Manual
- Volunteer and Partner Training sources
- FS Regional Blasters Contact List
- BWCAW Trail and Campsite Maintenance Guide
Images
- Image Library
For Traditional Tool and Skills Images visit the Image library and enter the category/keyword 'Traditional Tools and Skills'.
- Forest Service Technology and Development Resources for Crosscut Saw Sawyers
- Missoula Technology Development Center Publications
- Sources for Crosscut Saws
- Sources for Crosscut Saw Handle Parts
- Sources for Crosscut Saw Aluminum Wedges
- Making Hanging Wedges
- Saw Sheaths
- Sharpening Services
- "How I Sharpen a Crosscut Saw" YouTube Video
- Carrying a Saw
- Use and Care
- Lubrication
- Crosscut Saw News and Information
- Job Hazard Analysis - crosscut saw use and maintenance
Crosscut Saw Bulletin
The Cross-cut Saw Bulletin is produced and distributed by:
DAVID E. MICHAEL
Region 5 Crosscut Saw Coordinator
Trails & OHV Program Manager
Tahoe National Forest
631 Coyote Street
Nevada City, CA 95959
E-mail: demichael@fs.fed.us
Direct/Voice Mail: (530) 478-6183
Office: (530) 265-4531
Fax: (530) 478-6109
Contact David directly for current or past issues.
Case Study Examples
BWCAW
Juniper Prairie Wilderness
- Missoula Technology Development Center Publications
- Yesteryear Tools
An Internet Magazine that concentrates on hand tools, the toolmakers and the tool distributors that operated mostly between the mid-1800s and mid to late-1900s.
- Missoula Technology Development Center Publications
- National Dry Stone Masonry Conservancy Center
- Sources for Rigging Equipment
- Rock Tool Sources
- Army Rigging Manual
- Job Hazard Analysis
Selway Bitterroot Wilderness
Grip Hoist
Case Studies
Canoes and Sea Kayaks
Dog Sled
Foot Travel
Job Hazard Analyses
- Backcountry Travel Footwear Specific
- Backcountry Travel
- Front and Backcountry Travel, Flash Floods
- Front and Backcountry Travel
- Hiking in Steep and Rough Terrain
- Hiking on Uneven Surfaces
- Ski and Snowshoe Activities
Stock
- Livestock Management Plan - Stanislaus NF
- Stock Management Plan - Beaverhead-Deerlodge NF
- Stock Mgmt Plan - Salmon Challis NF
- Stock Use Training - Salmon Challis NF